|
Take the guesswork out of trailer inspections.
Mobile
Universal Trailer Tester is a diagnostic tool that tells you the
condition of your trailer in less than 60 seconds.
ELECTRICAL
TESTING
•
Indicator Lights: Auto-Cycle, Power Pulse, Cross, Open, Overloaded
and Shorted Circuits
• Use with 4/5, 6, 7 Spade and 7 Round Pin Connectors
• On-Board Cable Tester
AIR BRAKE TESTING
• Pulse Air to check Brake Operation with Remote
• Perform Leak Down Test on Service & Emergency Lines
• Observe Slacker Adjustment real time
By utilizing
a 12 volt car battery, a technician can now wheel out the tester
to the trailer and power up all its lighting systems while diagnosing
electrical problems.
RF remote control allows complete testing from over 100 feet away.
A technician is free to walk around any size trailer while in full
control of the testing sequence.
• Innovative
adapters allow testing to be performed on any trailer in service
in the USA.
• Unibody Cart design on pneumatic tires with battery compartment
and separate storage area.
• Wireless remote allows a tech to power circuits up to 100
ft from Tester. Includes detachable 5 ft 7-way Round pin cable.
• Ground Integrity Indicator takes the guess work out of diagnostics.
10 ft chassis ground cable allows testing of trailers solely grounded
by the hitch.
• Manual mode select and Auto Cycle Feature which continuously
powers up and switches to EACH circuit for 5 seconds to cut time
with trailer inspection.
• Crossed circuit indication warns operator of the unselected
circuit being powered by the selected circuit.
• Fused circuit and reverse polarity protection with warning
prevents damage to unit.
Power the trailer by using an automotive battery (not included).
• Capable of handling loads up to 20 amps or as low as .1
amp (LED Systems).
• Battery Integrity indicator warns of low battery supply
voltage.
• Open Circuit Indicator.
• Backlit amp meter reads up to 30 amps.
• Overload Protection.
• Made in the USA.
Click the image below for a PDF of the flyer.
|
